ITMA-Asia + CITME-2016
BRÜCKNER on ITMA Asia 2016
POWER-SHRINK Sanforizing line for the finishing of woven fabric
The rubber belt compacting line allows the sanforizing and compacting of very different types of woven fabrics. Finishing on a sanforizing line gives the fabric a more stable structure, a silky shine, a smooth hand and minimum residual shrinkage values. Typical end products are fabric for shirts and trousers, jeans, bed linen, working clothes, home textiles or upholstery material. BRÜCKNER offers single or double sanforizing lines and combinations with felt calenders depending on the product and the customer’s requirements.
Pic: BRÜCKNER POWER-SHRINK Sanforizing line for the finishing of woven fabric
With a continuous dyeing line by BRÜCKNER the customers will achieve uniform and reproducible dyeing results. The lines ensure a crease-free fabric flow without shading and migration. The symmetrical structure of the air circulation zones prevents a different shade on the two fabric sides. In addition the installed power is adapted to the low air flows required for dye drying which leads to a considerably lower energy consumption. Typical end products dyed on BRÜCKNER lines are fabrics for shirts and trousers, working clothes and home textiles.
Continuous research and development efforts have made BRÜCKNER machines today even more efficient and increased their service life and support the customers in minimizing their ecological footprint. Only one example: an indirect gas heating system has been developed particularly for the finishing of knitted fabric, which saves in combination with a special heat-recovery system energy and prevents the yellowing of the fabric. This is of particular importance in case of sensitive fabric containing elastane. If a company does not want to invest in a completely new line, BRÜCKNER offers a modification of the heating system for example from oil to indirect gas heating.
And BRÜCKNER developed a new minimum application unit. This application unit works with a minimum liquor tank of approx. 2.5 l for each m of working width. The minimum application quantities require in the following processes (for example drying or curing) clearly less water evaporation which has a positive effect on the energy requirement at the respective dryer. In addition there is no waste or prodigality of chemicals and no expensive disposal is required since the contents of the liquor tank can be used almost completely.
BRÜCKNER offers regarding the question of energy efficiency also the possibility of retrofitting for example a heat-recovery or exhaust air cleaning system. These systems can be retrofitted without problems also to machines made by other producers and help to safe energy and to reduce the environmental impact.
BRÜCKNER’s sales and service team is looking forward to meeting interested visitors and will advise them comprehensively.