ITM 2016 in Instanbul

ITM 2016

2016-06-20

No cause for alarm - KARL MAYER looks back with some satisfaction at the ITM fair

KARL MAYER’s stand once again proved to be much more than one of the first ports of call for the warp knitting and warp preparation sectors at this year’s ITM fair. The warp preparation section in particular was crowded, despite a relatively slow start to the trade fair in general.

...more

ITM 2016

2016-07-01

A global textile show with 49.700 visitors: ITM 2016

ITM 2016 International Textile Machinery Exhibition was held on June 1-4. ITM 2016, the meeting point for the industry professionals, where the textile technology giants gathered, put a smile on the exhibitors’ faces with its more than 49.000 visitors.

...more

ITM 2016

2016-06-20

SPGPrints reported tremendous interest in its digital inkjet and laser engraving technologies for textile printing at ITM 2016 in Istanbul, Turkey. The company confirmed six machine sales during and just after the show: four of its newly launched JAVELIN® inkjet printers to textile producers in Pakistan and two bestLEN engravers to Turkish customers. Additionally, enquiries were received from a broad base of printers who crowded the SPGPrints stand to watch demonstrations, inspect samples and see the future of textile manufacturing.

...more

ITM 2016

2016-06-16

EFI™ Reggiani has emphasized the “Green Factory of the Future” for industrial textile manufacturing by unveiling two advanced, eco-friendly and efficient printing technologies at the ITM Exhibition, June 1-4 at Istanbul’s Tuyap Expo Centre.

...more

ITM 2016

2016-06-16

SSM attended the show in Istanbul from 1st till 4th of June 2016 in Hall 3, Booth 315A. Twelve applications with the latest SSM technology had been displayed and gained great attention. All machines were shown for the first time in Turkey.

...more

ITM 2016

2016-06-01

The combination of the USTER® QUANTUM 3 Anniversary Edition and the USTER® QUANTUM EXPERT 3 makes quality management efficient, profitable and secure

...more

ITM 2016

2016-05-27

EFI Reggiani with "green printers" at ITM 2016

EFI™ Reggiani is emphasizing the “Green Factory of the Future” for industrial textile manufacturing by unveiling two advanced, eco-friendly and efficient printing technologies at the ITM Exhibition, June 1-4 at Istanbul’s Tuyap Expo Centre.

...more
 

ITM 2016

2016-05-24

SHIMA SEIKI to participate in ITM Texpo Eurasia 2016

Leading computerized knitting machine manufacturer SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the ITM Texpo Eurasia 2016 exhibition in Istanbul, Turkey in June. A prominent market for SHIMA SEIKI computerized knitting machines with both an established export base to Europe as well as a growing domestic market, Turkey is proving to be a high-potential market for the company’s WHOLEGARMENT® knitting technology.

...more

ITM 2016

2016-05-18

Itema with two premier launches in Turkey at ITM

Itema, the world’s largest privately held provider of advanced weaving solutions, including best-in-class weaving machines, spare parts and integrated services, will exhibit at ITM 2016.The only manufacturer in the world to offer the top three shuttleless weft insertion systems: rapier, airjet and projectile, the Italian-headquartered weaving machine major is present at ITM with the largest booth in the weaving hall (Hall 2, Booth 213).

...more

ITM 2016

2016-05-18

SPGPrints debuts JAVELIN® digital printer and presents optimised rotary screen solutions at ITM 2016

At ITM 2016 SPGPrints (Stand 805A) will introduce the JAVELIN® digital inkjet textile printer. Featuring the company’s acclaimed Archer® print head technology, this multiple-pass solution combines precision geometrics with low running costs, and is ideal for medium volume requirements. The company will also exhibit its NEBULA® digital inks that offer productivity and an expanded colour gamut for virtually all textile applications.

...more

ITM 2016

2016-05-12

Groz-Beckert will show many highlights at ITM

Groz-Beckert will be represented at the "Tüyap" exhibition grounds with a 210 m² stand in hall 7, booth 707/B showcasing the products and services of its product areas Knitting, Weaving, Nonwovens and Carding.

...more

ITM 2016

2016-05-10

SANTEX RIMAR GROUP and SMIT foster their strong commitment in Turkey

At ITM 2016 SMIT (Hall 2 / Booth 210 B) will exhibit a loom for high quality shirting which is an evolution of the series characterized by absence of guide block, flying ribbon technology and optimized warp shed studied to reduce yarn breakages or defects. SMIT smart platform of weaving machines is available in various configurations and can be used in all the textile sectors, including terry and home-textile.

...more

ITM 2016

2016-05-10

SANTEX RIMAR GROUP is focused on market needs

SANTEX RIMAR GROUP is one of the leading players in the world market of machine manufacturers for weaving, textile finishing, nonwovens, technical textiles and green technologies for water treatment and drying processes. At Istanbul and ITM the SANTEX RIMAR GROUP will present a wide range of its current solutions based on a strong strategy focused on market needs.

...more

ITM 2016

2016-05-05

ITM - highlights from Saurer Schlafhorst and Saurer Zinser

With their E3 label the German textile machinery manufacturers Saurer Schlafhorst and Saurer Zinser offer their customers a guarantee of triple added value in the spheres of Energy, Economics and Ergonomics. The spinning and winding machines of the market and technology leaders that bear this label clearly increase the production and profitability of textile companies all over the world.

...more

ITM 2016

2016-05-04

Textechno at the ITM 2016 Istanbul

At the ITM 2016 in Istanbul, Turkey, ECHNO Herbert Stein GmbH & Co. KG will present a number of brand-new testing instruments for fibres, yarns, and fabrics.

...more

ITM 2016

2016-05-03

Monforts ‘Thinking Ahead – for sustainable solutions’ at ITM

In line with its continuing theme to providing solutions for both economy and ecology Monforts will be presenting a wide range of advanced innovations and developments at ITM’16 in Istanbul.

...more

ITM 2016

2016-04-28

Picanol to present rapier & airjet innovations at ITM Istanbul

The ITM 2016 fair will be held at the TÜYAP Fair Convention and Congress Center in Istanbul from 1 - 4 June 2016. Picanol will be exhibiting in Hall 2, Booth 218, and will be displaying one airjet and two rapier weaving machines. The OptiMax-i and the TerryMax-i machines will be presented for the first time in Turkey. In order to ensure it places maximum emphasis on its weaving machines’ capacities, Picanol’s new machines will be displayed in a brand new booth design at the ITM fair.

...more

ITM 2016

2016-04-22

Savio at KTM and ITM exhibitions in Turkey

Turkey is ranked in the top five export markets of Savio, so the attendance at Turkish exhibitions is meant at massive level for being closer to the important customers who are interested in Savio machinery for either their green field or expansion projects.

...more

ITM 2016

2016-04-21

SETEX introduces the app SECOMmobile at ITM

SETEX Schermuly textile computer GmbH will show at ITM 2016 the new business App for mobile communication with SECOM controls, available for IOS/Apple and Android/Google tablets and smart phones.

...more

ITM 2016

2016-04-21

ITM 2016 promises to becoming the largest fair for textile machinery in Turkey ever

ITM 2016 International Textile Machinery Exhibition and concurrent HIGHTEX 2016 International Technical Textile & Nonwoven Trade Fair are expecting to attract 1200 exhibitors and more than 60.000 visitors from 72 countries. It will be held at Tuyap Fair Convention and Congress Center on June 1-4.

...more

ITM 2016

2016-04-20

Reiners + Fürst shows premium rings and travellers at ITM 2016

During the upcoming ITM in Istanbul Reiners + Fürst (R+F) will present the latest generation of TURBO chromium coated rings and a selection of enhanced ring travellers. R+F products are made in Germany.

...more

ITM 2016

2016-04-14

Suessen at ITM 2016 in Istanbul

SUESSEN will exhibit its products during ITM Istanbul to demonstrate the competence in handling and processing natural and man-made-fibres within the ring- and rotor spinning process.

...more